Develop and maintain embedded firmware for bare-metal microcontrollers, RTOS platforms, and embedded Linux controllers. Design and troubleshoot hardware, PCBs, LED systems, communications, and field-deployed transportation equipment. Lead root-cause investigations, component qualification, board bring-up, test automation, reliability testing, and corrective actions. Support production, contract manufacturers, and field service while maintaining technical documentation and compliance with transportation standards.
Senior Embedded Systems Engineer (Electrical / Firmware)
Skyline Products
Location: Colorado Springs, CO
Job Type: Full-Time
Reports To: Director of Engineering
Salary Range: $110,000. To $140,000. Annually
Travel: Up to 10% for field visits to customer sites and contract manufacturers
Industry: Transportation / Intelligent Transportation Systems (ITS)
This role sits squarely at the intersection of hardware and software. You’ll develop firmware for bare-metal microcontrollers and embedded Linux controllers, contribute to circuit and PCB design, and serve as a go-to engineer for problems that don’t stay neatly on one side of the hardware/software line, from a dead pixel on the bench to an intermittent communication fault on a sign mounted to an overpass. The ideal candidate is a methodical troubleshooter who is equally comfortable with a scope probe, a schematic, and a debugger, and who doesn’t consider a problem closed until the root cause is proven.
Skyline Products
Location: Colorado Springs, CO
Job Type: Full-Time
Reports To: Director of Engineering
Salary Range: $110,000. To $140,000. Annually
Travel: Up to 10% for field visits to customer sites and contract manufacturers
Industry: Transportation / Intelligent Transportation Systems (ITS)
About Skyline Products
Skyline Products designs and manufactures LED dynamic message signs and electronic price signs from our facility in Colorado Springs. For more than 55 years, our signs have been installed on highways, toll roads, and fueling stations across the United States, delivering information that drivers rely on every day. We are a focused engineering and manufacturing team where your work goes directly into products in the field.About the Role
We are looking for a Senior Embedded Systems Engineer with an electrical engineering foundation to join our engineering team developing LED message signs and control systems for the transportation industry. These signs are installed over highways and play a critical role in public safety and traffic management.This role sits squarely at the intersection of hardware and software. You’ll develop firmware for bare-metal microcontrollers and embedded Linux controllers, contribute to circuit and PCB design, and serve as a go-to engineer for problems that don’t stay neatly on one side of the hardware/software line, from a dead pixel on the bench to an intermittent communication fault on a sign mounted to an overpass. The ideal candidate is a methodical troubleshooter who is equally comfortable with a scope probe, a schematic, and a debugger, and who doesn’t consider a problem closed until the root cause is proven.
Key Responsibilities
- Lead root-cause investigations of field, production, and lab failures that span firmware, circuitry, components, PCB assembly, cabling/connectors, and environmental stress (heat, vibration, moisture), and drive them to verified corrective action
- Design, develop, and maintain embedded firmware in C/C++ on bare-metal microcontrollers (e.g., PIC, STM32/ARM Cortex-M) and RTOS-based platforms
- Build and maintain embedded Linux applications and system configuration on sign controllers, including networking, security hardening, storage, and boot configuration
- Contribute to and maintain existing, long-lived codebases, ensuring stability, clarity, and documentation
- Participate in electronic hardware design: schematic review, PCB layout review, component selection, and board bring-up
- Develop and tune RGB LED color mixing: per-color current and PWM balancing, white-point and color-matching across LED bins, and brightness/color consistency over temperature and dimming levels
- Evaluate and qualify components for long-life outdoor deployment (microcontrollers, LED drivers, LEDs, connectors, power and storage devices), including replacements for obsolete or unavailable parts
- Design and build test fixtures, automated test rigs, and lab tools (Python plus instrumentation) to reproduce intermittent failures and validate fixes
- Debug hardware/software issues using oscilloscopes, logic and protocol analyzers, JTAG/SWD debuggers, and other bench instruments
- Support production, contract manufacturers, and field service with failure analysis, pre-installation sign inspections, and on-site troubleshooting when needed
- Design systems with long-term reliability, diagnostics, and field maintainability in mind
- Ensure compliance with transportation and industry standards (e.g., NTCIP, NEMA TS 4) for robustness and safety
- Write and maintain technical documentation, including design documents, test procedures, failure analysis reports, and controlled quality documents
Required Qualifications
- Bachelor’s degree in Electrical Engineering (preferred) or Computer Engineering; Master’s a plus
- 5+ years of combined embedded hardware and firmware development experience
- Demonstrated, systematic troubleshooting ability across the hardware/software boundary: able to isolate whether a fault lives in firmware, circuit design, a component, assembly, or interconnect, and back the conclusion with data
- Ability to read and interpret schematics, datasheets, and PCB layouts; solid grasp of analog and digital circuit fundamentals
- Hands-on proficiency with lab instruments: oscilloscopes, logic analyzers, DMMs, power supplies, and in-circuit debuggers
- Proficiency in C in resource-constrained embedded environments (C++ a plus)
- Experience with bare-metal microcontroller development and bring-up (e.g., ARM Cortex-M, PIC, STM32)
- Understanding of low-level hardware interfaces: I2C, SPI, UART, RS-485, Ethernet (MAC/PHY), GPIO, PWM
- Working experience with embedded Linux (user-space applications, networking, SSH/user security, filesystems)
- Python for test automation, data capture/analysis, and engineering tools
- Experience with Git in shared codebases
- Clear written communication: able to write failure analysis findings for management, customers, and suppliers
Preferred Qualifications
- Experience with transportation, outdoor industrial, or safety-critical systems
- RGB LED color mixing fundamentals (color spaces, chromaticity, LED binning, per-channel current/PWM balancing)
- Familiarity with communication protocols used in ITS, such as NTCIP, SNMP, and multi-drop RS-485
- LED display technology: constant-current LED drivers, PWM grayscale, flicker-free refresh, LED thermal and failure modes
- Experience with RTOS and embedded TCP/IP stacks (e.g., FreeRTOS/lwIP, ThreadX/NetX Duo)
- Industrial networking: managed Ethernet switches, cellular modems, PPP
- PCB design tool experience (e.g., Altium, KiCad, OrCAD)
- Knowledge of PCBA manufacturing and DFM: SMT/through-hole assembly, conformal coating, connector selection and retention, and working with contract manufacturers on failure analysis
- Environmental and reliability testing: thermal (−34 to +74 °C per NEMA TS 4, and solar loading), vibration/shock, and accelerated life testing
- Knowledge of power management, backup power (supercapacitor/battery), watchdog timers, and fail-safe system design
- Experience with robust field-update mechanisms (e.g., bootloaders, remote updates)
- Exposure to EMI/EMC considerations in embedded design
- Familiarity with ISO 9001 quality systems and corrective-action processes
- Shell scripting (Bash) and comfort with Linux/WSL development environments
- 3D CAD and 3D printing for fixtures and small mechanical parts
Physical and Field Requirements
- Ability to work outdoors in varying weather conditions during field visits
- Ability to work from bucket trucks or at heights with proper safety equipment and training
- Ability to lift up to 50 lbs
- Valid driver’s license
What We Offer
- Benefits including medical, dental, and vision insurance, 401(k) with company match, and paid time off
- Work on public safety systems on Colorado highways and across the country, with real-world impact
- A small, collaborative engineering team where your work goes directly from the bench to the field
- Hybrid schedule with room for professional growth
- A chance to help shape the future of intelligent transportation infrastructure
Skyline Products Colorado Springs, Colorado, USA Office
2903 Delta Dr, Colorado Springs, CO, United States, 80910
Similar Jobs
37 Minutes Ago
Aerospace • Hardware • Information Technology • Security • Software • Cybersecurity • Defense
Leads the Command and Data Handling avionics subsystem for civil space and national defense spacecraft programs. Responsibilities include spacecraft networking, subsystem architecture, requirements flow-down, interface definition, verification and validation planning, technical documentation, integration and testing, and customer presentations. The role is primarily on-site and requires collaboration across multidisciplinary engineering teams.
Top Skills:
AuthenticationCcsdsEncryptionNetwork SecurityRs-422Spacecraft AvionicsSpacecraft NetworkingSpacewireTcpUartUdp
Aerospace • Hardware • Information Technology • Security • Software • Cybersecurity • Defense
Supports RF, electrical, and mechanical research and development by fabricating, assembling, testing, measuring, and troubleshooting antenna prototypes. Provides manufacturability input, contributes to design improvements, interprets drawings, uses hand and power tools, and operates laboratory and test equipment. Works with engineering and production teams in office, laboratory, cleanroom, and production-floor environments, may guide less-experienced employees, and must maintain a valid driver’s license and Secret clearance.
Top Skills:
Antenna FabricationAntenna TestingAntenna TroubleshootingAutocadBandsawsBondingCadCalipersDigital VoltmeterElectrical DesignIpc-A-610LathesMachiningMechanical DesignMicrometersOscilloscopePab FabricationPcb FabricationPolymericsRcs Range TestingRfRf TestingRoutersSealingSheet MetalSolderingSolidworksSpectrum AnalyzerTorque WrenchesVertical Mills
Aerospace • Hardware • Information Technology • Security • Software • Cybersecurity • Defense
Supports RF, electrical, and mechanical research and development through prototype fabrication, testing, measurement, troubleshooting, and assembly. Collaborates with engineers on manufacturability and production improvements, interprets drawings, uses test equipment and tools, and may guide less-experienced employees. The role is fully on-site in laboratory, cleanroom, office, or production environments and requires a valid driver’s license and Interim Secret clearance.
Top Skills:
Antenna TroubleshootingAutocadBonding And SealingCadDvmElectrical And Mechanical DesignIpc-A-610MachiningMicroelectronicsOscilloscopePab AssemblyPcb AssemblyPolymericsReflowRf ElectronicsRf TestingSheet Metal FabricationSolderingSolidworksSpectrum AnalyzerTest And Measurement ToolsWire Bonding
What you need to know about the Colorado Tech Scene
With a business-friendly climate and research universities like CU Boulder and Colorado State, Colorado has made a name for itself as a startup ecosystem. The state boasts a skilled workforce and high quality of life thanks to its affordable housing, vibrant cultural scene and unparalleled opportunities for outdoor recreation. Colorado is also home to the National Renewable Energy Laboratory, helping cement its status as a hub for renewable energy innovation.
Key Facts About Colorado Tech
- Number of Tech Workers: 260,000; 8.5% of overall workforce (2024 CompTIA survey)
- Major Tech Employers: Lockheed Martin, Century Link, Comcast, BAE Systems, Level 3
- Key Industries: Software, artificial intelligence, aerospace, e-commerce, fintech, healthtech
- Funding Landscape: $4.9 billion in VC funding in 2024 (Pitchbook)
- Notable Investors: Access Venture Partners, Ridgeline Ventures, Techstars, Blackhorn Ventures
- Research Centers and Universities: Colorado School of Mines, University of Colorado Boulder, University of Denver, Colorado State University, Mesa Laboratory, Space Science Institute, National Center for Atmospheric Research, National Renewable Energy Laboratory, Gottlieb Institute

