Westlake Chemical Corporation Logo

Westlake Chemical Corporation

Tooling Design Engineer

Posted 6 Hours Ago
Be an Early Applicant
In-Office
Henderson, CO, USA
85K-110K Annually
Senior level
In-Office
Henderson, CO, USA
85K-110K Annually
Senior level
Designs, develops, improves, and supports molds, tooling, fixtures, and production equipment for concrete and steel roofing manufacturing. Provides hands-on manufacturing engineering support, troubleshoots production issues, leads tooling trials and new product implementation, manages engineering projects, and coordinates with suppliers. Maintains CAD models, drawings, specifications, and revision controls while driving improvements in quality, throughput, reliability, safety, downtime, scrap, and cost.
The summary above was generated by AI

Westlake offers you the potential to enrich your work life and career experience in an entrepreneurial environment. We work together to enhance peoples' lives through our products and presence in the communities in which we operate.​

 SUMMARY

The Tooling & Design Engineer is responsible for the design, development, improvement, and ongoing support of tooling, molds, fixtures, and production equipment used in the manufacture of concrete and steel roofing products. This role partners closely with Operations, Maintenance, Quality, and Engineering to improve manufacturing efficiency, product quality, safety, reliability, and cost.  The position combines mechanical design expertise with hands-on manufacturing support and is expected to identify opportunities to improve tooling performance, reduce downtime, increase throughput, and support the introduction of new products and manufacturing processes.

 

DUTIES AND RESPONSIBILITIES

May include, but are not limited to, the following:

 Tooling & Mold Design
  • Design and develop molds, tooling, fixtures, jigs, packaging, and related equipment used in concrete product manufacturing.
  • Modify existing tooling to improve product quality, cycle time, ergonomics, durability, maintainability, and reliability.
  • Support tooling fabrication, installation, testing, validation, and production launch.
Manufacturing Engineering Support
  • Provide hands-on engineering support to manufacturing operations.
  • Partner with Maintenance and Operations to troubleshoot tooling, mold, equipment, and process-related production issues.
  • Support continuous improvement initiatives focused on productivity, scrap reduction, changeover time, labor efficiency, and capacity.
Product & Process Development
  • Support new product development and product changes by translating product requirements into manufacturable tooling and processes.
  • Conduct tooling trials and document design or process improvements prior to full production release.
Project Management
  • Manage tooling and engineering projects from concept through implementation.
  • Coordinate with internal fabrication teams and external tooling and equipment suppliers.
Documentation & Standards
  • Maintain engineering drawings, CAD models, specifications, tooling records, and revision controls.
  • Develop standardized tooling designs and engineering practices across manufacturing processes.
  • Support development of work instructions and manufacturing standards.
  • Assist with product testing, certifications, and technical reporting.

EDUCATION, EXPERIENCE AND QUALIFICATIONS

Education

  • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Mechanical Engineering Technology, or related technical discipline preferred.

Experience

  • 5+ years of experience in manufacturing engineering, tooling design, mechanical design, or related engineering role preferred.
  • Experience in concrete products, precast concrete, building products, heavy manufacturing, metal fabrication, or similar industrial manufacturing environment strongly preferred.
  • Experience with steel stamping and roll forming is preferred
  • Experience designing molds, fixtures, tooling, or production equipment strongly preferred.
  • Experience using data-driven analysis and root cause investigation techniques to identify problems, determine corrective actions, and establish effective next steps for resolution.

 


Skills

  • Proficiency with 3D CAD software such as SolidWorks, NX CAD, and/or AutoCAD Inventor.
  • Strong understanding of mechanical design principles, tolerances, fits, and manufacturing processes.
  • Knowledge of fabrication processes including welding, machining, forming, cutting, and assembly.
  • Ability to create and interpret detailed engineering drawings and specifications.
  • Understanding of hydraulics, pneumatics, mechanical systems, and industrial equipment preferred.
  • Experience with root cause analysis and structured problem-solving methods.
  • Familiarity with Lean manufacturing and continuous improvement principles.
  • Ability to analyze manufacturing data and identify opportunities for productivity and cost improvement.

Key Competencies

  • Strong mechanical aptitude and practical problem-solving ability.
  • Hands-on approach to manufacturing engineering.
  • Ability to move effectively between CAD/design work and the production floor.
  • Strong project management and organizational skills.
  • Ability to collaborate with production employees, maintenance technicians, engineers, vendors, and plant leadership.
  • Strong attention to detail with a focus on safety, quality, reliability, and manufacturability.
  • Ability to manage multiple engineering and tooling priorities simultaneously.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

 

WORK ENVIRONMENT

The noise level in the work environment is usually moderate as normally based in an office.  Some of the work may be required in the operating units which can require usage of required PPE including safety glasses, hearing protection, etc.  May also result in exposure to outside elements and may require usage of stairs and elevators.  Travel up to 50% including air travel or auto travel.

The pay range is between $85K and $110K


Westlake is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any characteristics protected by applicable legislation.

If you are an active Westlake employee (or an employee of any Westlake affiliates), please do not apply here. You will apply via the Jobs Hub application in Workday.

Similar Jobs

22 Days Ago
In-Office
110K-175K Annually
Senior level
110K-175K Annually
Senior level
Cloud • Software • Analytics
Design and validate custom tooling, test fixtures, and jigs for high-volume electronics manufacturing. Create CAD models, drawings, BOMs, ECOs, and technical documentation; provide DFM/DFT feedback; perform tolerance analysis; select manufacturing processes; collaborate with engineering teams, contract manufacturers, and vendors; support prototyping, tool release, and pilot builds; and help scale liquid cooling solutions and troubleshoot electromechanical systems.
Top Skills: 8DAalcsAgile PlmCadCdusCnc MachiningCold PlatesDevEcoInjection MoldingLiquid Cooling SystemsMcoPcnPlmSheet MetalTolerance Stackup AnalysisWindchill Pdmlink
2 Months Ago
In-Office
118K-205K Annually
Senior level
118K-205K Annually
Senior level
Aerospace • Energy • Defense • Manufacturing
Design, develop, fabricate, qualify, and implement tooling and ground support equipment for microreactor manufacturing, testing, transportation, installation, maintenance, and decommissioning. Create CAD models, drawings, bills of material, load requirements, and operating instructions. Collaborate with manufacturing, suppliers, technicians, and deployment teams to commission tooling, resolve fabrication issues, support field operations, and improve safety, usability, and reliability.
Top Skills: 3D CadAdditive ManufacturingCnc MachiningFinite Element AnalysisSheet Metal FabricationSiemens NxWelding
2 Months Ago
In-Office
150K-190K Annually
Senior level
150K-190K Annually
Senior level
Aerospace • Transportation • Defense • Manufacturing
Own the complete tooling lifecycle for aerospace airframe manufacturing, including fixture and jig architecture, CAD design, tolerance analysis, procurement, fabrication, installation, certification, and production support. Lead composite and metallic tooling development, metrology, proof-outs, defect investigations, vendor coordination, and DFM initiatives. Establish tooling standards and processes, mentor engineers and technicians, and transition prototype tooling toward scalable production.
Top Skills: As9100CamCmmComposite WorkbenchDodFaaFeaFibersimGd&TLaser TrackerNadcapNxPhotogrammetry

What you need to know about the Colorado Tech Scene

With a business-friendly climate and research universities like CU Boulder and Colorado State, Colorado has made a name for itself as a startup ecosystem. The state boasts a skilled workforce and high quality of life thanks to its affordable housing, vibrant cultural scene and unparalleled opportunities for outdoor recreation. Colorado is also home to the National Renewable Energy Laboratory, helping cement its status as a hub for renewable energy innovation.

Key Facts About Colorado Tech

  • Number of Tech Workers: 260,000; 8.5% of overall workforce (2024 CompTIA survey)
  • Major Tech Employers: Lockheed Martin, Century Link, Comcast, BAE Systems, Level 3
  • Key Industries: Software, artificial intelligence, aerospace, e-commerce, fintech, healthtech
  • Funding Landscape: $4.9 billion in VC funding in 2024 (Pitchbook)
  • Notable Investors: Access Venture Partners, Ridgeline Ventures, Techstars, Blackhorn Ventures
  • Research Centers and Universities: Colorado School of Mines, University of Colorado Boulder, University of Denver, Colorado State University, Mesa Laboratory, Space Science Institute, National Center for Atmospheric Research, National Renewable Energy Laboratory, Gottlieb Institute

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account